KSZ8863RLLI-TR Microchip Technology IC ETHERNET SWITCH 3PORT 48-LQFP

label:

November 17th, 2023 0

• Advanced Switch Features
- IEEE 802.1q VLAN Support for Up to 16 Groups (Full Range of VLAN IDs)
- VLAN ID Tag/Untag Options, Per Port Basis
- IEEE 802.1p/q Tag Insertion or Removal on a Per Port Basis (Egress)
- Programmable Rate Limiting at the Ingress and Egress on a Per Port Basis
- Broadcast Storm Protection with Percent Control (Global and Per Port Basis)
- IEEE 802.1d Rapid Spanning Tree Protocol Support
- Tail Tag Mode (1 byte Added before FCS) Support at Port 3 to Inform the Processor which Ingress Port Receives the Packet and its Priority
- Bypass Feature that Automatically Sustains the Switch Function between Port 1 and Port 2 when CPU (Port 3 Interface) Goes to the Sleep Mode
- Self-Address Filtering
- Individual MAC Address for Port 1 and Port 2
- Supports RMII Interface and 50 MHz Reference Clock Output
- IGMP Snooping (IPv4) Support for Multicast Packet Filtering
- IPv4/IPv6 QoS Support
- MAC Filtering Function to Forward Unknown Unicast Packets to Specified Port

• Comprehensive Configuration Register Access
- Serial Management Interface (SMI) to All Internal Registers
- MII Management (MIIM) Interface to PHY Registers
- High Speed SPI and I2C Interface to All Internal Registers
- I/O Pins Strapping and EEPROM to Program Selective Registers in Unmanaged Switch Mode
- Control Registers Configurable on the Fly (PortPriority, 802.1p/d/q, AN…)

• QoS/CoS Packet Prioritization Support
- Per Port, 802.1p and DiffServ-Based
- Re-Mapping of 802.1p Priority Field Per Port basis, Four Priority Levels

• Proven Integrated 3-Port 10/100 Ethernet Switch
- 3rd Generation Switch with Three MACs and Two PHYs Fully Compliant with IEEE 802.3u Standard
- Non-Blocking Switch Fabric Ensures Fast Packet Delivery by Utilizing a 1k MAC Address Lookup Table and a Store-and-Forward Architecture
- Full-Duplex IEEE 802.3x Flow Control (PAUSE) with Force Mode Option
- Half-Duplex Back Pressure Flow Control
- HP Auto MDI-X for Reliable Detection of and Correction for Straight-Through and Crossover Cables with Disable and Enable Option
- LinkMD® TDR-Based Cable Diagnostics Permit Identification of Faulty Copper Cabling
- MII Interface Supports Both MAC Mode and PHY Mode
- Comprehensive LED Indicator Support for Link, Activity, Full-/Half-Duplex and 10/100 Speed
- HBM ESD Rating 4 kV

• Switch Monitoring Features
- Port Mirroring/Monitoring/Sniffing: Ingress and/ or Egress Traffic to Any Port or MII
- MIB Counters for Fully Compliant Statistics Gathering 34 MIB Counters Per Port
- Loopback Modes for Remote Diagnostic of Failure

• Low Power Dissipation
- Full-Chip Software Power-Down (Register Configuration Not Saved)
- Energy-Detect Mode Support
- Dynamic Clock Tree Shutdown Feature
- Per Port Based Software Power-Save on PHY (Idle Link Detection, Register Configuration Preserved)
- Voltages: Single 3.3V Supply with Internal 1.8V LDO for 3.3V VDDIO
- Optional 3.3V, 2.5V, and 1.8V for VDDIO
- Transceiver Power 3.3V for VDDA_3.3

• Industrial Temperature Range: –40°C to +85°C

• Available in a 48-Pin LQFP, Lead-Free Package

CATALOG

KSZ8863RLLI-TR COUNTRY OF ORIGIN

KSZ8863RLLI-TR PARAMETRIC INFO

KSZ8863RLLI-TR PACKAGE INFO

KSZ8863RLLI-TR MANUFACTURING INFO

KSZ8863RLLI-TR PACKAGING INFO

KSZ8863RLLI-TR ECAD MODELS

KSZ8863RLLI-TR APPLICATIONS

COUNTRY OF ORIGIN

Malaysia

Taiwan (Province of China)

Thailand

United States of America

PARAMETRIC INFO

Number of Primary Switch Ports	3
PHY/Transceiver Interface	MII/RMII
Maximum Data Rate (Mbps)	100
Fiber Support	Yes
Internal Memory Buffer Size	32KB
Integrated LED Drivers	No
VLAN Support	Yes
JTAG Support	No
Typical Data Rate (Mbps)	10/100
Power Supply Type	Analog\|Digital
Minimum Operating Supply Voltage	1.69V\|2.5V
Typical Operating Supply Voltage	1.8V\|3.3V
Maximum Operating Supply Voltage	1.89V\|3.465V
Maximum Supply Current (mA)	112(Typ)
Minimum Operating Temperature (°C)	-40
Maximum Operating Temperature (°C)	85
Supplier Temperature Grade	Industrial
Minimum Storage Temperature (°C)	-55
Maximum Storage Temperature (°C)	150

PACKAGE INFO

Supplier Package	LQFP
Basic Package Type	Lead-Frame SMT
Pin Count	48
Lead Shape	Gull-wing
PCB	48
Tab	N/R
Package Length (mm)	7
Package Width (mm)	7
Package Height (mm)	1.4
Package Diameter (mm)	N/R
Mounting	Surface Mount
Package Weight (g)	N/A
Package Material	Plastic
Package Description	Low Profile Quad Flat Package
Package Family Name	QFP
Jedec	MS-026BBC
Package Outline	Link to Datasheet

MANUFACTURING INFO

MSL	3
Maximum Reflow Temperature (°C)	260
Reflow Solder Time (Sec)	20 to 40
Number of Reflow Cycle	3
Standard	J-STD-020C
Reflow Temp. Source	Link to Datasheet
Maximum Wave Temperature (°C)	N/R
Wave Solder Time (Sec)	N/R
Lead Finish(Plating)	Matte Sn annealed

PACKAGING INFO

Packaging	Tape and Reel
Quantity Of Packaging	1000
Packaging Document	Link to Datasheet

ECAD MODELS

APPLICATIONS

• VoIP Phone

• Set-Top/Game Box

• Automotive

• Industrial Control

• IPTV POF

• SOHO Residential Gateway

• Broadband Gateway/Firewall/VPN

• Integrated DSL/Cable Modem

• Wireless LAN Access Point + Gateway

• Standalone 10/100 Switch